Side-Discharging The Clippings - Toro 22186TE Operator's Manual

Figure 29
Side-discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the machine, remove it and insert the
recycle plug before side-discharging the clippings; refer
to Recycling the Clippings (page 15).
Important: A safety switch prevents the machine
from starting unless the recycle plug is securely
installed.
Installing the Side Discharge Chute
1. Unlock the side discharge door (Figure 30).
Figure 30
2. Lift open the side discharge door (Figure 31).
3. Install the side discharge chute and close the door
onto the chute (Figure 32).
Removing the Side Discharge Chute
To remove the side discharge chute, reverse the steps
above.
Important: Lock the side discharge door after you
close it (Figure 33).
17
Figure 31
Figure 32