Product Overview - Toro 22186TE Operator's Manual

2. Squeeze the button on the lever with your thumb
and fully insert the recycle plug into the opening
(Figure 11).
3. Release the button on the lever and ensure that the
top of the lever is lies fully in the switch channel. If
the top of the lever is not in the switch channel,
your machine will not start!
Note: If the lever does not latch properly,
disconnect the wire from the spark plug and check
for and remove any debris buildup in the tunnel.

Product Overview

1. Blade control bar
2. Self-propel drive bar
3. Handle
4. Fuel tank
5. Cutting height lever (4)
1. Grass bag
2. Side discharge chute
11
Figure 12
6. Air filter
7. Spark plug
8. Oil fill/dipstick (not shown)
9. Starter handle
Figure 13
3. recycle plug (installed)