Toro 79362 Operator's Manual page 14

2
Figure 18
1. Handle support
5. Rotate idler bracket to relax belt tension and slip belt
off snowthrower pulley (Fig. 19),
1
3
Figure 19
1. Outer groove of (PTO)
power take off
2. Idler pulley
6. Remove the belt from the outside pulley. Refer to
Replacing the Snowthrower Belt on page 17.
7. Lower attachment lift all the way.
8. Loosen locknut on eyebolt to relax spring tension
(Fig. 20). Unhook lift assist spring from frame cross
rod.
9. Remove hairpin cotter to disconnect lift rod from
attachment lift (Fig. 20).
10. Remove lift rod (and optional spacer washers) from lift
tube (Fig. 20).
1
m–2789
2. Mid hitch
4
2
m–2788
3. Belt guide
4. Snowthrower pulley
14
2
3
5
6
Figure 20
1. Lift rod
2. Optional spacer washer
3. Lift tube
4. Hairpin cotter–small
11. Open front hitch lock (Fig. 21) and remove
snowthrower mounting frame from front hitch.
3
2
Figure 21
1. Lock
2. Mounting frame
12. Remove hairpin cotter and washer to disconnect lift
tube from housing.
1
4
7
m–2787
5. Spring
6. Eyebolt
7. Locknut
1
1248
3. Front hitch