Specifications; General Specifications - Toro Debris Blower 600 Operator's Manual

Specifications

General Specifications

Fan Output
Fan Speed
Outlet Area
Directional Control
Caster Wheels
Height Adjustment
Turf Protection
Ground Clearance
Fan
Fan Housing
Drive
Mounting:
Weight:
Note: Specifications and design subject to change without notice.
7000 CFM + 200 CFM
165 MPH + 20 MPH
1173 RPM + 20 RPM @ 540 PTO Input
100 square inches
Deflector chute for 180 degree diversion as standard. Rotational control of gate just behind
3–point hitch
Two 13 x 5.00–6 pneumatic rubber tires
0 – 1–1/2 by 1/2 in. increments
16 inch long 4 inch diameter turf roller behind fan housing. 8 inch long 4 inch diameter turf
roller under deflector. Beveled skid plate under deflector chute.
Determined by turf tractor 3–point hitch and caster wheels
.250 HRPO plate
Radial design with 8 blades
Outer diameter 27 inches + .5 inch
Width 8 1/2 inches + 1–1/4 inch
Weight 98 lbs. + 2 lbs.
Split house – upper housing and lower housing
Upper housing – 12 ga. HRPO front and rear plates flanged at separation seam with 12 ga.
HRPO rolled and flanged blower band with increasing radius from cutoff point
Lower housing – 10 ga. HRPO front and rear plates flanged at separation seam with 12 ga.
HRPO roller and flanged blower band with increasing radius to exhaust
Inside housing clearance 9–1/4 inches + 1–1/4 inch
Belt drive 4–5VX
Power source: 30 PTO HP +1–3 HP turf tractor with 3–point hitch and 540 PTO
Drive ratio: .460:1
Love joy torsion type belt tightener
Category one or two, three–point hitch on any tractor in the 30 PTO HP range with a
three–point hitch and 540 PTO
475 lbs.
6