Operation; Operating Tips; Adjusting Discharge Direction - Toro Debris Blower 600 Operator's Manual

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Operating Tips

Warning
Discharged air has considerable force and could
cause injury or loss of footing.
Stay away from the discharge opening when the
machine is operating.
Keep bystanders away from the discharge
opening when the machine is running.
1. Start the tractor and run it at a low RPM.
2. Engage the PTO while the engine is at idle speed.
3. Increase the PTO speed to 1800 RPM.
4. Practice blowing material. It is advisable to blow the
same direction the wind is blowing to prevent material
from blowing back into the cleared area.

Adjusting Discharge Direction

The direction of the discharge opening can be changed
from the side to the front by moving the control handle
(Fig. 8).
2
1. Discharge opening
11
1
Figure 8
2. Control handle