Maintenance; Greasing The Blower - Toro Debris Blower 600 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine
from the normal operating position.

Greasing the Blower

Fan Shaft Bearings
The (2) fan shaft bearings (Fig. 9) must be lubricated after
every 8 hours of operation with a No. 2 Lithium-based
grease.
Note: Remove belt cover to access rear fitting.
Figure 9
Castor Wheels
Under normal conditions, grease the (2) castor wheel pivot
tubes (Fig. 10) after every 50 hours of use. Use a No. 2
Lithium-based grease.
Figure 10
Drive Shaft
Under normal conditions, grease the (2) drive shaft fittings
after every 100 hours of use (Fig. 11). Use a No. 2
Lithium-based grease.
Figure 11
12