Maintenance And Storage - Toro Flex-Force Power System 51827 Operator's Manual

IV. Maintenance and Storage
1. Maintain the tool with care—Keep it clean and in good repair for best
performance and to reduce the risk of injury. Follow the instructions
for lubricating and changing accessories. Keep handles dry, clean,
and free from oil and grease.
2. When the battery pack is not in use, keep it away from metal objects
such as paper clips, coins, keys, nails, and screws that can make
a connection from one terminal to another. Shorting the battery
terminals may cause burns or a fire.
3. Keep your hands and feet away from moving parts.
4. Stop the tool, remove the battery pack from the tool, and wait for all
movement to stop before adjusting, servicing, cleaning, or storing
the tool.
5. Check the tool for damaged parts—If there are damaged guards or
other parts, determine whether it will operate properly. Check for
misaligned and binding moving parts, broken parts, mounting, and
any other condition that may affect its operation. Unless indicated in
the instructions, have an Authorized Service Dealer repair or replace
a damaged guard or part.
6. Keep all fasteners on the tool tight.
7. Do not attempt to service or repair the tool, battery pack, or battery
charger except as indicated in the instructions. Have an Authorized
Service Dealer perform service using identical replacement parts to
ensure that the product is safely maintained.
8. Store an idle tool indoors in a place that is dry, secure, and out of
the reach of children.
SAVE THESE
INSTRUCTIONS
8