Advertisement
MX100IIXG
CONNECTING CABLES AND HOST SELECT SWITCH SETTING
• Connecting to an Apple Macintosh Series Computer
Use a standard Macintosh 8-pin system peripheral cable.
• Connecting to an NEC PC-9801/9821 Series Computer
Use a standard 8-pin MINI DIN → 25-pin D-SUB cross cable.
• Connecting to an IBM PC/AT Series Computer
(a) Use a standard 8-pin MINI DIN → 9-pin D-SUB cross cable.
(b) Use a standard 8-pin MINI DIN → 25-pin D-SUB cross cable.
• HOST SELECT Switch Setting
Set the HOST SELECT switch on the rear panel of the Control Unit according to your computer type.
HOST
SELECT
MAC
Apple Macintosh series
PC1
NEC PC-9801/9821 series
PC2
IBM PC/AT series
MIDI
General MIDI equipment
* Apple and Macintosh are trade marks of Apple Computer, Inc.
* IBM PC/AT is a trademark of International Business Machines Corporation.
* PC-9801/9821 is a trademark of NEC Corporation.
43
Baud
Computer type
rate
On the computer side, set the clock speed
31,250
to 1 MHz.
Some software require the HOST SELECT
31,250
switch to be set to PC2 (38,400 bps) in or-
der to function properly.
38,400
31,250
Remarks
Advertisement
