Advertisement
15 Plunger Assembly and Coil Assembly
15-1 Open the top board.
15-2 Remove the upper front board.
15-3 Remove the fall board.
15-4 Remove the key stopper rail.
15-5 Remove the keyboard; remove the plunger
assembly.
15-6 Remove the lower front board.
15-7 Remove the screws marked [8G] and the upper
yoke; remove the coil assembly. (Fig. 6)
16 Pedal Drive Unit
16-1 Remove the lower front board.
16-2 Loosen the four (4) screws marked [91S]; remove
the pedal drive unit. (Fig. 7)
17 Switch Box Assembly
17-1 Remove the four screws marked [073S]; remove
the switch box assembly. (Fig. 8)
MX100IIXG
(Fig. 6 )
(Fig. 7)
(Fig. 8)
18
Advertisement
