Advertisement
DISASSEMBLY PROCEDURE
A Cabinet Parts and Action
1
Upper Front Board
1-1 Open the top board.
1-2 Loosen the screw and securing fastener on the
inside of left side board.
1-3 Remove the upper front board. (Fig. A)
2
Lower Front Board
2-1 Remove the stopper screw from the lower front
board spring.
2-2 While pressing on the spring, pull the knob
towards you, and remove the lower front board.
(Fig. B)
3 Action Unit
3-1 Open the top board.
3-2 Remove the upper front board. (See procedure 1)
3-3 Remove the fall board.
3-4 Loosen the screw, then remove the muffler
assembly.
3-5 Disconnect the two (2) connectors on the left side
of the action unit and the three (3) connectors on
the right side.
3-6 Take off the knob bolts, and remove the action unit.
(Fig. C)
MX100IIXG
(Fig. A)
(Fig.B)
(Fig.C)
14
Advertisement
