Advertisement
MX100IIXG
TEST MODE
40
MX100IIXG
CONTROL BOARD (CTRL SHEET)
Operating buttons/remote control buttons/dial switching test.
The number for each button and switch is displayed on the 7SEG.
TO HOST communication test.
Operation of switch changes the display: [MAC]/[PC2]/[PC1]/MIDI].
MIDI communication test
(Connect MIDI OUT to MIDI IN with a MIDI cable before the test)
Communication test between the control unit and PK-CTL board.
Keyboard and pedals do not operate.
Ensemble-sound test. Sends NOTE-ON signals to internal tone generator. (Speaker connected)
FDD (floppy disk drive) write/read test.
(Insert formatted disk.)
Note that the test will erase any existing floppy-disk data.
(Do not execute if market service.)
FDD read (only) test.
(Insert formatted disk.)
(Do not execute if market service.)
41
Speaker sounding test.
(Metronome sound test)
Note: No table data will be
cleared.
Advertisement
