Operation; Operating The Power Take Off (Pto); Attachment Lift Lever - Toro Wheel Horse 79263 Operator's Manual

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Danger
When the snowthrower is in operation, the
impeller and auger can be rotating and cut off or
injure hands and feet.
Before adjusting, cleaning, repairing and
inspecting the snowthrower, and before
unclogging the discharge chute, disengage the
PTO, stop the engine, remove the key, and wait
for all moving parts to stop.
Use a stick, not your hands, to remove an
obstruction from the discharge chute.
Stay away from the discharge and auger
openings while operating the snowthrower.
Keep face, hands, feet, and any other part of
your body or clothing away from concealed,
moving, or rotating parts.
Caution
The snowthrower adds a lot of weight to the front
of the tractor, causing poor traction and an
unstable condition which could result in a loss of
control.
Install the 100lb rear wheel weights (sold
separately).
Operating the Power Take Off
(PTO)
The PTO engages and disengages power to the electric
clutch.
While the ignition key is in the Run or Lights positions and
the PTO is engaged (On), the PTO light will be lit. When
this light is on, the starter will not crank. Turn off the PTO
before starting the engine or getting off of the tractor.
Engaging the PTO
1. Stop the machine.
2. Pull the PTO knob out (Fig. 26).
1
Figure 26
1. Off—Disengaged
Disengaging the PTO
1. Stop the machine.
2. Push the PTO knob in (Fig.26).

Attachment Lift Lever

The attachment lift lever (on some models) (Fig. 27) is
used to manually raise and lower attachments.
2
1
Figure 27
1. Lift lever
2. Button
3. Dial-A-Height
16
2
1206
2. On—Engaged
3
5
4
6
1205
4. Indicator
5. High
6. Mounting position