Proper Care Of The Bht - Denso BHT-700BB-CE Operator's Manual

Proper Care of the BHT

Ensure to turn OFF the BHT before cleaning.
● BHT terminal, charger terminal dirt
Periodically wipe any dirt from the BHT or battery terminals with a cotton swab and
so on.
● Housing dirt
Wipe any dirt from the housing with a dry, soft
cloth.
If excessively dirty, wipe with a soft cloth that
has been soaked in soapy water (always use
neutral detergent) and wrung out thoroughly.
Never use substances such as benzene or
alcohol, as this may cause the housing to be
marred or paint to peel off.
● LCD screen dirt
Never rub or strike the LCD screen with anything hard, as this may result in
scratches on the screen or breakage.
● Keypad dirt
When cleaning the keypad, do not scrub the surface too hard or pull on the keys, as
this may break the keys.
● Barcode reading window dirt
Any dirt or dust adhering to the clear plate of the barcode reading window will
adversely affect reading performance.
When using in dusty areas, perform periodic inspections to check whether any dust
has accumulated on the clear plate of the barcode reading window, and if so, first
blow the dust away with an airbrush, and then gently wipe the plate with a cotton
swab or similar soft object.
If sand or hard particles have accumulated, rubbing the plate will result in scratches.
Blow the particles away with an airbrush or wipe with a soft brush.
6