KTM 890 Duke R US 2020 Operator's Manual page 276

22 TROUBLESHOOTING
Faults
N The idling speed indicator
lamp does not light up when
the transmission is in neutral
Engine dies during the trip
The ABS warning lamp lights
up
High oil consumption
Headlight and position light are
not functioning
Turn signal, brake light, and
horn are not functional
274
Possible cause
Gear position sensor not pro-
grammed
Lack of fuel
Fuse 1, 2 or 3 blown
ABS fuse blown
Large difference in wheel
speeds of the front and rear
wheels
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscos-
ity)
Fuse 6 blown
Fuse 5 blown
Action
–
Read out the fault memory using the
KTM diagnostics tool.
–
Refuel. ( p. 141)
–
Change the fuses of individual power
consumers. ( p. 226)
–
Change the ABS fuses. (
–
Stop the vehicle, switch off the igni-
tion, and start it again.
–
Read out the ABS fault memory using
the KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and the oil filter,
clean the oil screens. (
–
Change the fuses of individual power
consumers. ( p. 226)
–
Change the fuses of individual power
consumers. ( p. 226)
p. 224)
p. 255)
p. 256)