KTM 890 Duke R US 2020 Operator's Manual page 206

15 WHEELS, TIRES
204
–
Engage the thrust bearing of brake caliper bracket
link fork.
–
Jack up the rear wheel into the link fork, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
–
Place the chain on the sprocket.
–
Position chain adjuster
it yet.
Info
Mount the left and right chain adjusters in the same
position.
–
Make sure that chain adjusters
adjusting screws. Tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
K01362-12
Nut, rear wheel
spindle
–
Position wheel speed sensor
–
Mount and tighten screw
2 3
. Mount nut , but do not tighten
2
are fitted correctly on the
3
.
C
M25x1.5 90 Nm (66.4 lbf ft)
Thread and contact area
of wheel spindle greased
4
in the hole.
5
.
B
and the
.