KTM 890 Duke R US 2020 Operator's Manual page 180

13 SERVICE WORK ON THE CHASSIS
178
–
Check the chain sliding guard for wear.
» If continuous signs of wear to the chain are visible on the
chain sliding guard in the area
–
Replace the chain sliding guard.
» If the chain sliding guard is highly worn on the underside
in the marked area
–
Replace the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Remaining screws,
chassis
V01265-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 158)
D marked:
E
:
M5 5 Nm (3.7 lbf ft)