Download Print this page

Samsung Sens NT-R410 Series Service Manual page 94

Advertisement

- This document cannot be used without the authorization of Samsung -
3. Disassembly and Reassembly
Part
Name
LCD
Ass'y
Figure
1. 1st, Remove 6 Rubbers
2nd, Remove 6 screws.
- M2xL5 : 6 EA (Upper side)
* CAUTION :
Be careful with scratch in LCD-Front when
removing Rubber-Front.
2. Separate lower side of LCD Front Putting
in hands between LCD Panel and LCD Front.
3. Separate left and right side with the same
way.
4. Separate upper side with the same way.
*CAUTION
Don't get in too much force with
disassembling
LCD Front.
5. Remove Inverter screw.
- M2xL5 : 1 EA (RED)
6. Separate Inverter from Back cover.
3-7
Description

Advertisement

loading