Table of Contents
Advertisement
Quick Links
Notices
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, mechanical photocopying, recording or
otherwise, without the prior written permission of the manufacturer.
The information within this manual is subject to change without notice.
The manufacturer shall not be held liable for technical or editorial errors or omissions
contained in herein; nor for incidental or consequential damages resulting from the
furnishing, performance or use of this material.
Microsoft Windows is a registered trademark of the Microsoft Corporation.
Product names mentioned herein are for identification purposes only, and may be
trademarks and/or registered trademarks of their respective companies.
Macrovision Statement
If your computer has a DVD drive and an analog TV Out port, the following
paragraph applies:
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Copyright 2002 All rights are reserved
Notices i
Advertisement
Table of Contents
Related Manuals for Samsung NT10FK01D1/SUK
Summary of Contents for Samsung NT10FK01D1/SUK
- Page 1 Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein;...
-
Page 2: Important Safety Information
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. -
Page 3: Care During Use
Care During Use Do not walk on the power cord or allow anything to rest on it. Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. -
Page 4: Battery Disposal
Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries. -
Page 5: Federal Communications Commission (Fcc)
Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 6 Federal Communications Commission Part 68 Statement This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number(REN) for this equipment. If requested, this information must be provided to the telephone company.
-
Page 7: Ctr21 Statement
transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending themessage and the telephone number of the sending machine or such business, other entity, or individual. -
Page 8: Laser Safety
Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. -
Page 9: Power Cord Requirements
Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. -
Page 10: Country-Specific Power Cord Set Requirements
Country-Specific Power Cord Set Requirements The requirements listed below are applicable to the specific country listed: Country Australia Austria Belgium Canada Denmark Finland France Germany Italy Japan The Netherlands Norway Sweden Switzerland United Kingdom United States Notes: 1. Flexible cord must be Type HO5VV-F, 2-conductor, 1.0 mm² conductor size. -
Page 11: Using Your Documentation
Using Your Documentation Congratulations on your purchase of a notebook computer with the Windows® XP operating system. Whether you are new to using a portable computer or are an experienced user, this user’s manual can help you get the most from your computer. Manual Documentation Conventions Information Icons Three icons and their associated messages appear in this manual. -
Page 12: Touchpad Conventions
CD-ROM Device Naming Convention In many installation programs you will have to get a program from the CD-ROM device. The program installation sequence assumes that the CD is drive d:\, however this is not always the case. The name of the CD-ROM drive is the letter following the letter assigned to your last HDD. -
Page 13: Introducing Your Computer
Introducing Your Computer Your computer is a lightweight portable computer that includes features such as Dolby Digital & Dolby Theater System support, CD-ROM/floppy drives, Biometric (fingerprint) security system (factory option) and wireless LAN capability (factory option), to meet your computing needs at home or on the road. [Figures may be different depending on options). -
Page 14: Buttons And Leds
Buttons and LEDs Power Button Number Lock Icon Caps Lock Icon Scroll Lock Icon Drive Access Icon Right Side CD/DVD - ROM Left Side PC Card Eject Buttons TV-Out Port 4 Users Manual User Programmable Button E-Mail Button Internet Button Fan Vent PC Card Slot Fan Vent... -
Page 15: Back Side
Back Side PS/2 Port 1394 Port Modem Port Parallel Docking USB Ports DC-In Port Printer Port Connector Fan Vent External Monitor Port Bottom Flex Bay Latch Battery Compartment Flex Bay Compartment Memory Compartment Hard Drive Mini PCI Compartment Introducing Your Computer 5... -
Page 16: Using Your Computer For The First Time
Using Your Computer for the First Time This section gives you detailed information on using your computer for the first time. Installing the Battery To install the battery pack: 1. With the computer’s power off, close the LCD panel and turn the computer over so the bottom of the unit faces up. -
Page 17: Attaching The Ac Adapter
Attaching the AC Adapter Your computer runs on power from the battery in the computer or from an electrical outlet. The first time that you use your computer, fully charge the battery by attaching the power cord to the computer and to an electrical outlet. All batteries lose their charge if they sit unused for an extended time period. -
Page 18: Turning On The Computer
Turning On the Computer To turn on the computer’s power for the first time: 1. Slide the LCD latch, located on the front of the cover to the right. 2. Lift up the cover. 3. Press and then release the power button. The power light is on when the computer’s power is on. -
Page 19: Turning Off Your Computer
Turning Off Your Computer Prior to shutting down your computer ensure all of your data and current work are saved. The system will ask if you wish to save any unsaved work, saving your work first will speed the shutdown process. To turn off the computer, complete the following steps: 1. -
Page 20: Tips For Using Your Computer
Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer: Do not try to disassemble your computer. Opening the system chassis voids your warranty. Only an authorised manufacturer service center can replace or add any parts inside the chassis. -
Page 21: Locking Your Computer
Travelling with Your Computer Air Travel If you are travelling by air, follow these tips: Take the computer with you as carry-on luggage. Do not check the computer with your baggage. Allow the computer and disks to go through the X-ray security devices. Do not hand-carry disks through the walk-through metal detectors, which can cause loss of data. -
Page 22: Handling Spills
Handling Spills Do not spill anything on your computer. The best way to avoid spills is to avoid eating and drinking around your computer. If you do spill something on your computer, turn off your computer, unplug it immediately, and do the following: If you spill liquid on the keyboard, drain as much of the liquid from the keyboard as possible. -
Page 23: Using The Keyboard
Using the Keyboard Your computer has an 87/88-key keyboard. By pressing designated key combinations, you can have access to all the key functions of a full-sized keyboard. Function Key Application Key Although the layout of the keys on your computer’s keyboard is different from that on a desktop computer’s keyboard, the keyboard feels like a full-sized keyboard when you use it. -
Page 24: Using The Numeric Keypad
Do not allow liquid to drip into the keyboard or you may damage the keyboard. Using the Numeric Keypad Your keyboard includes a numeric keypad, which is a group of keys that you can set to type numbers and mathematical symbols, such as the plus sign. A number or symbol on the right corner of each keypad key shows its numeric function. -
Page 25: Using Special Function Keys
Using Special Function Keys The function key activates special functions when it is pressed in combination with another keys. Table 2 shows the special key combinations. Table 2. Description of Special Function Key Combinations Combinations Name Prt Sc Sys Rq CRT/LCD Gauge Gauge... - Page 26 User Defined Buttons (SENS Keyboard) You may program the three buttons to the right of the power button to start any program you have installed on your computer. The default settings for these buttons are: Internet To reprogram the Sens Keyboard, follow the steps below: 1.
-
Page 27: Using The Touchpad
Using the Touchpad Your computer is equipped with a touchpad, which is an integrated-pointing device that is used to perform standard mouse functions. The touchpad is an advanced and reliable pointing device that works with a touch of your finger. Press on the touchpad gently. - Page 28 Action Double-Click/Tap Click-Hold Right-Click Scroll Up Scroll Down PS/2 Mouse: You may change the setup in Setup > Advanced Menu Disabled prevents both the touchpad and external PS/2 port from functioning. Single mouse (default) enables the external PS/2 port or the touchpad, and external PS/2 port has priority.
- Page 29 Drag (Move) To move a window on the desktop, complete the following: 1. Click the window title bar or icon in the bottom of the window which you want to drag using the touchpad. 2. Press the left touchpad button and hold it. 3.
-
Page 30: Reading The System Status Lights
Reading the System Status Lights System Status lights show the status of computer functions. Name Num Lock Caps Lock Scroll Lock Drive Access E-mail Alert Power Battery Status 20 Users Manual Table 4. System Status Lights Function Changes a portion of the keyboard to a numeric keypad. See ”Using the Numeric Keypad”... -
Page 31: Connecting To The Internet
Connecting to the Internet This section explains how to connect you to the internet. For details on how to establish the connection contact the Internet Service Provider [ISP] or system administrator [SysAdmin]. Using the Modem Install the Modem cable by simply plugging the cable into the slot in the back of the computer. -
Page 32: Precautions Before Use
Precautions Before Use Country Selection Country Selection: Because your computer is very mobile you must country you are calling from is selected correctly, otherwise you may experience connection problems. To change the country selection proceed as follows: 1. Start > Control Panel > Network and Internet Connections. 2. -
Page 33: Using The Lan
If you use a simple terminal program (i.e. hyper terminal): Type the “ATX3&W” or “ATX3” command as an initialization command. MODEM Notes: 1. In order to use the 56K feature, be sure to check if the standards supported by the on-line service provider and the modem are identical. 2. -
Page 34: Configuring Network Environment
Configuring Network Environment Configure the Network Adapter as follows: 1. Click Start > Control Panel > Network and Internet Connections 2. Click icon (Network Connections) 3. Double-Click the 4. Select Internet Protocol (TCP/IP) in the “This connection uses the following items:”... -
Page 35: Network Protocols
Wireless Connection (Factory Option) Your computer’s wireless LAN adapter is ready to use for most situations, however if your system does not have a DHCP server or you wish to personally configure your wireless LAN connection, proceed as outlined in “Configuring Network Environment” below. - Page 36 Configuring Network Environment Configure the Wireless Network Adapter as follows: 1. Click Start > Control Panel > Network and Internet Connections 2. Click icon (Network Connections) 3. Double-Click the Wireless Network Connection icon. The Connect to Wireless Network window pops up. 4.
-
Page 37: Using The Flex-Bay
Using the Flex-Bay CD-ROM drive: Shipped with some computers is also an available option. CD-ROM R/W drive: Shipped with some computers is also an available option. DVD-ROM drive: Shipped with some computers is also an available option. DVD/CD-RW Combo drive: Shipped with some computers is also an available option. - Page 38 Remove/Install a Flex-Bay Device - Power On You can use the Softex Bay Manager utility to hot-swap your devices in the flex-bay. To start the Softex Bay Manager utility: 1. Click Start > Control Panel > Other Control Panel Options > Softex Bay Manager.
-
Page 39: Remove A Device
To insert a device: 1. Open the Softex Bay Manager Utility. You do not have to turn the computer over to change devices. Simply tilt the computer up and locate the Flex-Bay latch. See ”Bottom” on page 5 for the location of the Flex-Bay latch. -
Page 40: Using The Floppy Disk Drive
Using the Disk Drives Using the Floppy Disk Drive Your computer comes with a 1.44 MB, 3.5-inch, floppy drive. To use a floppy disk in your computer, insert it into the floppy drive. Floppy Disk Eject Button To remove a floppy disk, press the floppy disk eject button on the front of the floppy drive. -
Page 41: Using The Cd/Dvd-Rom Drive
Using the CD/DVD-ROM Drive Compact discs are designed so that you can easily insert one into the computer when you need it, and then remove it. See ”Using the Flex-Bay” on page 27 for information on installing the DVD-ROM drive into the computer. DVD Notes: A DVD player is a factory option and if you ordered this option you will have to install the provided DVD software to view the DVD Title. -
Page 42: Working With Pc Cards
Working with PC Cards When you install PC Cards, you can add a multitude of functions to your notebook computer similar to those found on add-in boards for desktop computers. There are many PC Cards on the market, the supported PC Cards are listed below: Input/output, such as modem, network, video capture, and SCSI cards. -
Page 43: Using Pc Cards
Using PC Cards To insert a PC Card into a slot: 1. Push the slot door in with the PC Card. 2. Align the card with a slot and insert the card into the slot until it locks in place. PC Card Eject Buttons PC Card: (Example) Insert PC Card with product... -
Page 44: Media Player
Multi Media Functions/Equipment Media Player You can play video and audio CD files with the Windows Media Player, as well as watching TV, video and listening to the radio through internet. The on-board audio hardware and software of your computer enable the computer to play audio/video compact discs. -
Page 45: Using The Volume Control Icon
Dolby Digital & Dolby Theater System Your computer supports Dolby Digital & Dolby Theater System through a SPDIF connector, located next to the volume control wheel on the left side of the computer. You must have a 3.5 mm (mono)- to RCA cable to use this port. Volume Control Using the Wheel Volume Control Simply turn the wheel located on the left side of the computer. -
Page 46: Movie Maker
Movie Maker You can edit audio and video data using this Movie Maker included with Windows XP. It is also possible to make a slide show with each frame or picture. To start the program: Click Start > All Programs > Accessories > Windows Movie Maker. Please refer to the on-line help manual to operate the Windows Movie Maker. -
Page 47: Using The Battery
Using the Battery Your computer uses a smart rechargeable Lithium-ion (Li-ion) battery pack for power when the AC adapter is not attached to an electrical outlet. The smart battery gives a accurate measurement of the current battery capacity which helps extend operating time by enabling effective power management in operating systems that take advantage of the accurate information supplied by the battery. -
Page 48: Safely Using The Battery
Safely Using the Battery Follow these guidelines to safely use the battery: Turn off your computer and unplug it if you accidentally: – Expose the equipment to liquid. – Drop, jar, or damage the computer. Use only approved battery chargers. Do not disassemble the battery, heat it above 100°C, or burn it. -
Page 49: Monitoring The Battery Charge
Installing the Battery To install the battery pack: 1. With the computer’s power off, close the LCD panel and turn the computer over so the bottom of the unit faces up. 2. Slide the battery compartment cover straight up and off the computer. Insert the battery into the battery compartment, ensuring the correct orientation so that the battery fits in its slot properly. -
Page 50: Power Meter
Power Meter The Power Meter displays the charge of the batteries and the current source of computer power, AC or batteries. You may monitor the battery charge or usage by using the “Power Meter”. To access the power meter click click Start >... -
Page 51: Battery Warnings
Battery Warnings If the battery charge is low (about 10%) you have approximately 5–10 minutes of battery life left. You should: Save your work and, Connect the power cord to the computer or turn off the computer and install a fully charged battery. -
Page 52: Using System Setup
Using System Setup The System Setup (BIOS) program enables you to configure your computer hardware and set security and power-savings options. The settings you choose are stored in battery-maintained CMOS memory that saves the information even when the computer’s power is turned off. When your computer is turned back on, it is configured with the values found in this memory. - Page 53 Table 6. System Setup Navigation Keys Navigation Key Function Displays the General Help window. Exits the current menu. Moves the cursor up and down between fields. Selects different menus. Pressing the ESC key at the Main menu brings you to the Exit menu. Scrolls backwards through the options for the highlighted field.
-
Page 54: Changing Booting Priority
Changing Booting Priority The Boot menu in System Setup enables you to select the booting device and to set booting options. Boot Device Priority field enables: You to select the order in which the computer attempts to boot from different devices. The field has three (3) options: DVD/CD-ROM Drive, Removable Devices and Hard Drive. -
Page 55: Using System Security
Using System Security This section describes your computer security programs. The first is the standard BIOS security which is standard on almost all computers. The second is a advanced factory option Biometric security system that uses your fingerprint(s) to control access to your computer and individual files if necessary. -
Page 56: If You Forget Your Password
Write your password down and keep it in a safe place. If you do forget and cannot find the written note, please contact the Samsung Helpline. Please have your receipts available to verify the type and model of your computer. You may be charged for password removal. - Page 57 Biometric Security The factory optional fingerprint sensor provides unique security access to your computer. You will no longer have to worry about losing or forgetting your password. Since every person has a unique set of fingerprints, only a biometrically enrolled person may have access to your computer. Advantages of Biometric Security are: Very high level of security No password to remember, lose or have stolen.
-
Page 58: Using Power Management Options
Using Power Management Options Your computer includes Power Management options that can help the battery charge last longer and extend the life of the battery. Power-management options will slow down or shut off system components when the components are not being used. Power management may slow down system performance. - Page 59 3. Click the Power Schemes tab to display the basic power management options. Power Schemes Tab 4. Select the time that you wish each of the following actions to occur in Battery and AC power mode. Turn off monitor: Turn off hard disks: System standby: System hibernates: Turning off the monitor and HDDs will save a substantial battery power, therefore...
- Page 60 If You Reinstall Windows: You should re-establish hibernate in power options by opening Options Properties window and click on the Hibernate tab then click “Enable Hibernation”. Frequent Interruptions: If you experience frequent interruptions, you might also consider putting your computer into automatic hibernation after a specified number of minutes using the power management options.
- Page 61 Advanced Power Management Schemes This section discusses the advanced power management schemes. There are two buttons that you can use to manually conserve power. To enter the power management window complete the following: 1. Click Start > Control Panel > Performance and Maintenance. 2.
-
Page 62: Using The Hard Drive
Using the Hard Drive Your computer includes a removable IDE (integrated drive electronics) hard drive. The IDE hard drive can store the data and programs your computer uses. The drive plugs into a connector on the system board. The hard drive that comes with your computer has already been formatted. Do not format the hard drive. -
Page 63: Installing A Hard Drive
Installing a Hard Drive To install a hard drive: 1. Remove the old hard drive from the computer as described in the previous section. 2. Slide the new drive into the hard drive compartment. Make sure the drive is pushed back as far as it will go. -
Page 64: Video Features And Configuration
Video Features and Configuration All these video modes can be displayed on an external monitor. However, if you disconnect an external monitor that was attached to your computer and then start the computer, the LCD may revert to a different resolution than the one you chose for the external monitor. -
Page 65: Configuring Display Features
Configuring Display Features The following sections describe how to configure the display settings on your computer. Display Resolution Notes: When Windows XP is initially installed it will automatically adjust the resolution to maximum available. Changing Colour Depth and Resolution To change the colour depth and resolution of your LCD or external monitor: 1. - Page 66 Using Dual View Mode Single View mode is the basic display mode which displays same view on all the display devices connected to a system. Dual View mode is the “Extended screen mode” supported in Windows, which displays separate views on each display devices connected to a system. The default setting on your system is Single View mode.
- Page 67 The secondary monitor has a display of 256 colours (colour depth) and 640x480 pixels (resolution) at first. The colour depth and resolution of primary/secondary monitors are separately changeable. To reset the system to Single View mode: 1. Start Display properties. 2.
- Page 68 Using the TV-Out Port Using the TV-out port, a compatible TV or other compatible display device can be connected and an image displayed. No Audio is transmitted through the TV-Out port. To check if and how your TV displays the TV-out signal see the documentation included with your TV.
-
Page 69: Using Options
Using Options You can order the following options for your Notebook computer from your authorised reseller: An extra AC adapter. An auto adapter that enables you to charge the computer’s battery and operate the computer while in an automobile. An extra battery pack. An upgraded hard drive. -
Page 70: Before You Install Memory
Before You Install Memory To prevent personal injury and damage to the equipment, follow the precautions listed here before installing a memory module. Take the following precautions when installing a memory module: Before you remove the memory module compartment door, turn off the computer, unplug the power cord, and remove the battery. - Page 71 2. Using a screwdriver, remove the screw that holds the memory-module compartment door in place. 3. Grasp the edge of the door and pull the door off the chassis. 4. Remove installed modules if necessary: 5. Align the connector on the memory module with the connector of the slot. 6.
-
Page 72: Docking Options
Docking Options Contact your reseller for a list of docking options available for your Notebook computer. User’s manuals are included with the docking options. Wireless LAN The wireless LAN option allows easy connection to large or small office networks while also providing freedom from the constraints of cables and sockets. To setup and use the Wireless LAN, Please refer to the user manual provided with the option at the time of purchase. -
Page 73: Troubleshooting
Recovery CD to reinstall OS and System Software CD to reinstall the corrupt device drivers. System Recovery Precaution: Before you start restoring your windows operating system insure you backup all data on your hard drive. Samsung is NOT responsible for any data loss. Troubleshooting 63... - Page 74 Questions and Answers Operating System Problems Problem The computer does nothing when you turn it on. Some of the letter keys type numbers instead of the indicated letters. Battery power seems to run out faster than expected. Certain software programs “hang”...
-
Page 75: Video Problems
Problem No sound. System/BIOS behaves erratically Video Problems Problem Nothing appears on the LCD panel when you turn on the computer. Error Message when entering Power Management while in Multimonitor mode. Nothing appears on the external monitor when you switch the display to it. Only the LCD Display works when system returns from Power management mode... - Page 76 Problem Cannot toggle between CRT and LCD while playing the 3D game. There is LCD or CRT has noise (speckles, lines or raged edges) on the picture when playing a MPEG file with the Media player/ DVD software or using the USB camera. In DOS mode the CRT/LCD button does not work.
-
Page 77: Modem Problems
Modem Problems Problem My modem doesn't connect to services or disconnects during communication When using a PBX phone system I can't dial on my modem. Screen displays random or garbage characters during communications. Reports error message that insufficient Hard Disk space is available. -
Page 78: Reinstalling Software
Samsung is NOT responsible for any data loss. You MUST, however reinstall all of your applications and drivers using the Software CD and other application software as required. - Page 79 If the Recovery Menu does not appear, proceed as follows: 1. Restart your computer 2. Open the CD Drawer and insert the Recovery CD. Close the drawer. 3. You will see a message “Press any key to boot from the CD”, press any key.
-
Page 80: Specifications
Specifications Dimension * LCD viewing area LCD viewing area (15” TFT) Width Depth Height Weight (with integrated floppy drive, Li-Ion battery & 14.1” TFT LCD & weight saver) Environment Ambient temperature, operating Ambient temperature, storage Relative humidity (noncondensing), operating Relative humidity (noncondensing), storage Altitude, operating Altitude, storage Shock, operating... - Page 81 Abbreviations A ..Amperes AC ..Alternating current ACPI ..Advanced Configuration and Power management Interface APM ..Advanced Power Management ATA.
- Page 82 ISA ..Industry Standard Architecture KB ..Kilobytes kg ..Kilograms LAN..Local-area network lb..
- Page 83 Glossary AC adapter The AC (or alternating current) adapter regulates current coming into your computer from the wall outlet. The current at the wall outlet is alternating current and needs to be changed by the adapter to DC (direct current) before your computer can use it for power.
- Page 84 CardBus CardBus technology enables the computer to use 32-bit PC Cards. Hardware in the computer and the Windows operating system provide support for the 32-bit cards. The voltage of 32-bit cards (3.3 volts) is lower than that of 16-bit cards (5 volts).
-
Page 85: Hard Drive
Hard drive Also called fixed disk. A hard drive is connected to the computer and can be installed or removed. Data written to a hard drive remains until it is overwritten or corrupted. The 2.5-inch hard drive in your computer was designed for use in a notebook computer. - Page 86 PC Card PC Card stands for personal computer card. The Personal Computer Memory Card International Association (PCMCIA) defines the standards used to develop all PC Cards. PC Card types include: modems, Ethernet adapters, SCSI adapters, ATA cards, and memory cards. PC slot The PC slot is the hardware slot in the computer where the PC Card is placed.
- Page 87 Shadow RAM A write-protected area of RAM that contains a copy of the BIOS. As the computer boots, the BIOS is copied from its permanent location in ROM to RAM. The BIOS can be executed much faster in RAM than in ROM. The BIOS remains in shadow RAM until you turn off the computer.