Samsung Sens NT-R410 Series Service Manual page 115

- This Document can not be used without Samsung's authorization -
4. Troubleshooting
14. The LAN function does not work.
→ Check if the LAN cable is properly connected.
→ Check if the LAN driver is properly installed.
→ If the driver is properly installed, check if the LAN cable jack is out of order.
→ Replace the main board
15. The USB function does not work.
→ Check if the USB jack is out of order.
→ Replace the main board
16. The wireless LAN does not work normally.
→ Check if the WLAN slide switch is in the ON position.
→ Check if the WLAN driver is properly installed.
→ Check if the wireless LAN antenna cable is properly connected.
→ Replace the main board
4 - 18