Preparing Your Lcd Hdtv For Wall Mounting; To Remove The Stand Base - Vizio VW47L FHDTV10A User Manual

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VW47L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing.
If you choose to mount the VW47L FHDTV10A on the wall, please follow the instructions below for
removing the stand base.

To remove the stand base

1. Unplug all of the cables and cords
from your VW47L FHDTV10A.
2. Place the VW47L FHDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Pull the stand cover off by squeezing
on both sides of the cover to release
the retaining plastic tabs.
6. Now, the VW47L FHDTV10A can fit securely
to a mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the TV.
Please make sure to read the instructions of your
specific mount to properly hang the VW47L
FHDTV10A.
The pitch of the mounting holes is 630mm horizontally
and 200mm vertically.
The screw type required is metric M8, 1.25mm pitch.
The length of the screws will depend on the thickness
plate being attach to the TV set; our brackets come
with different length screws.
To find the perfect mount for the VIZIO VW47L FHDTV10A, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 9/18/2007
VIZIO VW47L FHDTV10A User Manual
4. Remove the four (4) screws so that the stand base can be
removed.
5. Gently remove the stand base.
6
www.VIZIO.com