Preparing Your Lcd Hdtv For Wall Mounting - Vizio VT470M User Manual

Preparing your LCD HDTV for Wall Mounting

Your VIZIO HDTV can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the TV on the wall, please follow the instructions below for removing the stand.
To remove the stand:
5. Unplug all cables from the HDTV.
6. Place your HDTV face down on a soft and flat
surface (blanket, foam, cloth, etc) to prevent
any damage to the TV.
7. Remove the total of eight (4) screws holding
the stand to the TV. M4, 12mm long
8. Carefully remove the stand, pulling the base
towards you.
The TV can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the
back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang
your TV.
The pitch of the mounting holes is 400mm
horizontally and 200mm vertically.
The screw type required is metric M6, 12mm
pitch. The length of the screws will depend on
the thickness plate being attached to the TV.
To find the perfect mount for your HDTV, browse VIZIO's certified mount selection at
call directly 888-VIZIOCE (888-849-4623).
Version 5/26/2009 9
www.VIZIO.com
VIZIO VT420M/VT470M User Manual
www.VIZIO.com or