Table of Contents
Advertisement
2.7 Connecting an external Receiver/Amp
1.
Turn off the power to the LCD HDTV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of the LCD HDTV.
3.
Turn on the power to the LCD HDTV
and Receiver/Amp.
4.
Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5.
Press the
select the Audio menu.
6.
Press the
to select SPEAKERS.
7.
Press the
select OFF so that the sound from the
LCD HDTV will now be routed
through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.
2.7.1 Optical
Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving digital audio with
the program being viewed no matter what input (TV, AV, Component or HDMI) is being used.
Version 9/18/2007
on the remote control to
on the remote control
on the remote control to
Output
of
www.VIZIO.com
VIZIO VW47L FHDTV10A User Manual
Audio
received
24
with
HD
Advertisement
Table of Contents
Troubleshooting
