Preparing Your Lcd Hdtv For Wall Mounting; To Remove The Stand Base - Vizio VO22LFHDTV10A User Manual

Preparing Your LCD HDTV for Wall Mounting

To remove the stand base

1. Unplug all of the cables and cords
from your VO22L FHDTV10A.
2. Place the VO22L FHDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Push up the plastic panel on the back
of the stand and lift it away to release.
4. Remove the four (4) screws holding
the base.
5. Carefully remove the stand base.
Now, the VO22L FHDTV10A can fit securely
to a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the TV. Please make sure to read the
instructions of your specific mount to properly
hang the VO22L FHDTV10A.
The pitch of the mounting holes is 100mm
horizontally and 100mm vertically.
The screw type required is metric M4, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VO22L
FHDTV10A, browse VIZIO's certified mount
selection at www.VIZIO.com
Version 9/9/2008
or call directly 888-VIZIOCE (888-849-4623).
www.VIZIO.com
VIZIO VO22L FHDTV10A User Manual
8