Preparing Your Lcd Hdtv For Wall Mounting - Vizio VX20L User Manual

Preparing Your LCD HDTV for Wall Mounting

The VIZIO VX20L HDTV20A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VX20L HDTV20A on the wall, please follow the instructions below for removing
the stand base.
To remove the stand
base
1. Unplug all of the cables and cords
from your VX20L HDTV20A.
2. Place the VX20L HDTV20A face down
on a soft and flat surface (blanket,
foam, cloth, etc) to prevent any
damage to the TV.
3. Push up the plastic panel on the back
of the stand and lift it away once to
releases.
4. Remove the four (4) screws that were
hidden by the panel, while holding the
base.
5. Carefully remove the stand base.
6. The metal bracket remaining will not
interfere with the wall mount.
Now, the VX20L HDTV20A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the TV. Please make sure to read the
instructions of your specific mount to properly
hang the VX20L HDTV20A.
The pitch of the mounting holes is 100mm
horizontally and 100mm vertically.
The screw type required is metric M4, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VX20L
HDTV20A, browse VIZIO's certified mount
selection at www.VIZIO.com
888-VIZIOCE (888-849-4623).
Version 11/28/2007
or call directly
6
www.VIZIO.com
VIZIO VX20L HDTV20A User Manual