Connecting Coaxial (Rf); Using Your Antenna Or Digital Cable For Dtv /Tv; Using The Antenna Or Cable Through Your Vcr - Vizio VW47L FHDTV10A User Manual

2.2 Connecting Coaxial (RF)

2.2.1 Using Your Antenna or Digital Cable for DTV
/TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital
cable (out-of-the-wall, not from the Cable Box) to the DTV/TV
CABLE/ANTENNA connector.
3. Turn on the power to the HDTV.
4. Select DTV using the INPUT button on the remote or side of the
HDTV, or directly by pressing the TV button on the Remote Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the
program guides, or consult your cable, satellite or TV station operator.
b) Digital broadcasts are not available in all areas.
www.antennaweb.org
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact us at
call 1-888-VIZIOCE (1-888-849-4623).
2.2.2 Using the Antenna or Cable through your
VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the "Output to TV", "RF Out" or "Antenna Out" connector on
the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at
the rear of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the
HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect
it to the "Antenna In" connector on the rear of your VCR.
Version 9/18/2007
VIZIO VW47L FHDTV10A User Manual
for detailed information.
14
www.VIZIO.com
Refer to
www.VIZIO.com or