Operating Functions - Omron H5F Instruction Manual

2. Operating Functions

Operating function
Timer Operation
(ON / OFF)
ON time OFF time
Pulse-Output Operation
Pulse Width
ON time
Forced ON/OFF
Operation
Override and automatic
return operation
Settings
Output
Operation Start
Partial operation on specified day
Program 1
(Specified)
Settings
Operation
day
Specified
day
Holiday
Operation
day
Settings
Current
week
Following
week
Output control is determined by the ON/OFF time
settings.
• Minimum setting interval: 1 min
• One ON/OFF set counts as two steps.
• Up to 24 steps can be set.
Output turns ON for a fixed period (pulse) at the set
time.
• Pulse Width : 1 to 59s,1 to 60 min
• One pulse-output operation set counts as one step.
• Up to 24 steps can be set.
Control output is continuously held in the ON
state, regardless of the settings, using the Out
ON/OFF switch.
Using the Out ON/OFF switch and the Write Key,
regardless of the settings, control output is held in the
ON state until the next OFF time.
• Operation after the output turns OFF (or ON) will be
determined by the settings.
• This function can be used with pulse-output operation.
The Time Switch operates according to only some of the
settings on a user-specified day.
Program 2
Example (Sunday selected as specified day):
Monday to Saturday: 8:00 to 12:00 (No. 1)
Sunday:
• The Time Switch cannot be set to operate only on a specified day.
• This function can be used with pulse-output operation.
It is possible to set a day in the current week on which
Holiday
the Time Switch will not operate.When that day has
passed, operation will continue according to the regular
settings, and the Time Switch will operate as normal on
that day from the following week.
・This function can be used with pulse-output operation.
Explanation
13:00 to 17:00 (No. 2)
8:00 to 12:00 (No. 1)
- 8 -
Remarks
Ｐ ． １ １
Ｐ ． １ ３
−
Ｐ ． ２ ３
Ｐ ． １ ５
Ｐ ． ２ １