Omron H5F Instruction Manual page 25

【Using Override and automatic return operation for
pulse-output operation 】
Pulse-output operation proceeds in the following way when used for
pulse-output operation.
• If Override and automatic return operation is turned ON, output is turned
ON for the set pulse width.
• If Override and automatic return operation is turned OFF, output remains
OFF until the scheduled end of pulse output.
The operation method is the same as for timer operation.
【Example1】 Override and automatic return operation turned ON while
Regular settings
Actual output
operation
Point at which the Out ON/OFF switch changes from Auto to ON.
Point at which the Out ON/OFF switch changes from ON to Auto
with the
【Example2】 Override and automatic return operation turned ON while
Regular settings
Actual output
operation
Point at which the Out ON/OFF switch changes from Auto to ON.
Point at which the Out ON/OFF switch changes from ON to Auto
with the
【Example3】 Override and automatic return operation turned OFF while
Regular settings
Actual output
operation
Point at which the Out ON/OFF switch changes from Auto to OFF.
Point at which the Out ON/OFF switch changes from OFF to Auto
with the
output is ON (pulse width: 30 min)
30min
key held down.
WRITE
output is OFF (pulse width: 30 min)
30min
key held down.
WRITE
output is OFF
key held down.
WRITE
- 24 -
From the next time
onwards, output operates
according to the regular
settings.
From the next time
onwards, output operates
according to the regular
settings.
From the next time
onwards, output operates
according to the regular
settings.