Advertisement
step 01:
(Part C)×12
M6*15mm bolt with washer
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. Line up the bolt holes on the end of the table leg (B) with the corresponding bolt
holes on the table top (A). Secure with M6*15mm bolt with washer (C) using allen wrench (D).
2. Repeat above step until the 4 table legs (B) are secured to the table top (A).
Do not completely tighten screws until all screws are in place.
(Part D)×1
allen wrench
B
A
C
C
C
7
Advertisement
