Aux Operation - Clarion CMS2 Owner's Manual & Installation Manual

iPod/iPhone Mode Operation
Setting iPod Simple Control Mode
Use this function if you wish to operate through
your iPod/iPhone connected to this unit via the
USB Cable.
The factory default setting is OFF.
1. When in iPod/iPhone mode, Press the [OP]
Options button.
2. Press the [ / ] button until "Simple Control"
appears on the display.
3. Press the [ / ] to navigate through your
iPod/iPhone Menu Options.
4. When "Simple Control" is displayed, press
the [ ] button to turn the Simple Control
ON or OFF.
ON: iPod/iPhone controls are made through
your connected iPod/iPhone device.
OFF: iPod/iPhone controls cannot be made
through your connected iPod/iPhone.

AUX Operation

The AUX RCA inputs in this system are provided
to allow playback of sounds and music from
external devices connected to this unit.
[SRC]
Press the button to select the
AUX Input sensitivity
setting
Make the following settings to select the sensitivity
when sounds from external devices connected to
this unit are difficult to hear even after adjusting
the volume.
1. Press the [ADJ] adjust button.
2. Press the [ / ] button until "Aux In Mid"
is displayed.
3. Press the [ / ] button to select the "Mid",
"Low" or "High".
Note: When AUX mode is selected, AUX IN
sensitivity can be adjusted.
14
CMS2
Note:
When performing iPod/iPhone operations using
Simple Control, make the operations slowly. If
repetitive operations are performed too quickly,
unforeseen errors may occur.
When performing iPod/iPhone operations using
Simple Control, please do not operate the iPod/
iPhone and the unit at the same time, otherwise
unexpected events may occur.
Some iPod/iPhone models do not support this
function. Please consult Clarion Customer
Service or Clarion website to confirm which
models are supported
"AUX In"
.