CaptionCall 78T User Manual page 58

Other Options
The Advanced Setup settings screen displays the current wireless network
settings of the CaptionCall phone and lets you change them if needed .
WARNING
You should not change any wireless network settings unless you have the
technical knowledge required to do so . Invalid wireless network settings may
prevent the CaptionCall phone from working properly .
To change wireless network settings:
1 . Touch the SSID button . A list of available networks will be displayed in order
of signal strength . Select the wireless network you want to use from the list .
2 . Touch the Network Type button and select the type of security used by the
wireless network you have selected .
3 . Touch the Encryption button and select the type of encryption used by the
wireless network you have selected .
4 . Touch the Network Key button and use the on-screen keyboard to enter the
password (key) required by the wireless network you have selected .
5 . Touch the Save button to save the password .
6 . Touch the Save button to save all changes . The CaptionCall phone will then
attempt to connect to the selected wireless network .
7 . Look at the list of wireless networks on the Wireless settings screen . If
the name of the wireless network you configured is shown in green, your
wireless network settings changes are valid . If the name is shown in white,
this means there is no saved information for this SSID . If your changes are
invalid, the name will display with the word FAILED in orange .
You can also manually configure the DHCP settings for wireless networks. See
page 61 for instructions on manually configuring DHCP.
Customer Support 1-877-557-2227 63