Wired Network Settings - CaptionCall 78T User Manual

Wired Network Settings

The Wired Network settings screen displays the current wired network settings
of the CaptionCall phone and lets you configure these settings.
The DHCP (Dynamic Host Control Protocol) network setting is enabled by default .
DHCP automatically assigns network settings to the CaptionCall phone, including:
• IP Address
• Subnet Mask
• Default Gateway
• DNS (Domain Name Server)
WARNING
You should not disable DHCP or change any wired network settings unless you
have the technical knowledge required to do so .
If DHCP is not enabled on your network, or if you wish to manually enter your
Network settings:
1 . Touch OFF. Automatic (DHCP) and the network settings fields below it will
become active .
2 . Touch the field for the setting you want to change.
3 . Use the keypad and enter the correct information .
4 . Touch Save as you complete each item, and then touch Save on the Wired
Network screen to save the network setting .
Customer Support 1-877-557-2227 61