Westfalia 17 12 23 Instruction Manual page 13

Using the Milk Frother for heating up Milk
1. Remove the agitator from the container. Preferably store
the agitator under the lid. Hook the agitator in the agitator
holder (9).
2. Pour the milk into the container. Observe the upper max
marking (B) for heating up milk.
3. Close the lid and press the ON/OFF button (4) once. The
LED shines while the unit is operating.
4. The heating plate in the base heats up and the
milk gets lightly stirred and heated. After
approx. 1 minute the milk frother will reach the
preset temperature and automatically turns off.
Cleaning
Before cleaning, please pull the power plug and allow the unit to cool down!
Only use a lightly moistened cloth to clean the motor unit.
Do not immerse the milk frother and the base in water or any liquids! Clean the
milk frother preferably immediately after each use.
Pour tepid water and some drops of detergent into the container. Run the milk
frother for short time and then unplug the unit. For thoroughly cleaning the unit,
disassemble the lid. Completely unfold the lid beyond the hinges (2) and
remove.
Do not use metal or sharp items to clean the unit, because these may damage
the surfaces.
Do not use aggressive chemicals or similar materials.
Store the milk frother in a dry place out of reach of children.
Using
8
B