Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
Specifications Technical Specification for hygrometer PCE-HT 50 Measurement Measurement function Resolution Accuracy range -20 …60 °C Air temperature 0.1 °C ±1 °C ±3 % (50 ... 80 % RH) Air humidity 20 ... 99 % RH 1 % RH ±5 %...
Operation Control panel Display External temperature sensor DOWN/MIN key UP/MAX key MODE key Temperature unit key Getting started Inserting the batteries • Remove the battery cover by pulling it downwards. Insert the batteries into the battery compartment. Make sure the polarity is correct. •...
Functions Humidity By pressing the MODE key once, you can switch between the display of the temperature of the external sensor and of the humidity inside. Temperature unit Press the temperature unit key to change the unit in which the temperature is displayed. Min/Max function •...
Warranty You can read our warranty terms in our General Business Terms which you can find here: https://www.pce-instruments.com/english/terms. Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
Page 8
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel.
Need help?
Do you have a question about the PCE-HT 50 and is the answer not in the manual?
Questions and answers