System Related Messages - TidalFit EP-12 Owner's Manual

TOPSIDE CONTROL INSTRUCTIONS

SYSTEM RELATED MESSAGES

Program memory failure – M022
Call you dealer for service.
The settings have been reset– M021
Call you dealer for service if this message appears on more than one
power-up.
The clock has failed –M020
Call you dealer for service.
Configuration error (Spa will not Start Up)
Call you dealer for service.
The GFCI test failed (System Could Not Test the GFCI) – M036 (North
America Only) May indicate an unsafe installation. Call you dealer for ser-
vice.
A pump may be stuck on – M034
Water may be overheated.
NOTE: POWER DOWN THE SPA! DO NOT ENTER THE WATER!
Call you dealer for service.
Hot fault – M035
A pump appears to have been stuck on with the spa was last powered on.
Water may be overheated.
NOTE: POWER DOWN THE SPA! DO NOT ENTER THE WATER!
Call you dealer for service.
45