Temperature Operation - TidalFit EP-12 Owner's Manual

TOPSIDE CONTROL INSTRUCTIONS
Down Button: The Down button will operate pump 3 (if
applicable). First press of the Down button will activate pump
3. A second press of the Down button will deactivate pump 3.
If pump 3 is not manually turned off by pressing the Down
button it will automatically timeout after 15 minutes.
Select Button: Will return operation back to the main menu.

TEMPERATURE OPERATION

The only item that can be changed on the left side of the Main Screen is
the Set Temperature.
Left Button: Press the left arrow button to highlight the set
temperature.
Up Button: Use the Up Button to raise the set temperature
Down Button: Use the Down Button to lower the set temperature.
Select Button: Press the Select Button to save the Set
Temperature Range: The Temperature Range is displayed in
the upper Right Hand corner of the display. This indicates
what the range of the set point can be. Please see the section on
adjusting setting to change the Temperature Range
29