Ndisassembly Of The Pneumatic Motor - Larius NOVA 55:1 EXT Operating And Maintenance Manual

DISASSEMBLY OF THE PNEUMATIC MOTOR
N
Always close compressed air supply and dischar-
gepressure before dismantling the pneumatic
motor from the pump.
• Unscrew the joint sleeve to remove the pumping unit from
the motor.
• Disconnect the air supply hose from the pump.
• Unscrew the fitting (N1) and the sleeve (N2).
• Unscrew the screws (N3) [be careful of washers (N4)] and
remove the cover (N5).
• Unscrew the two ring nuts (N6) from the support (N7).
Conjunction sleeve
N7
N14
N13
N12
N6
ED. 06 - 07/2020 - Cod. 150152
• Unscrew the screws(N8) [be careful of washers (N9)] and remove
the support (N7) together with the rollers (N10) and the pins (N11).
• Remove the spring (N12), the spring guide rod (N13) and the
roller pushing piston (N14). Make sure that the spring slides
freely on the guide rod, that the guide rod slides freely on the
roller pushing piston and that the latter slides freely inside the
support hole.
• Check conditions on the roller (N10)and the pin (N11). Replace
if damaged.
• Remove and check the shock absorber (N15) and the washer
(N16).
N10
N15
N16
nova 55:1 ext
N8
N9
www.larius.com
N1
N2
N3
N4
N5
N6
N12
N13
N14
N10
N11
N11
13