Wired Timer Remote Control - ADJ ENTOUR CHILL User Manual

Entour Chill
1. Timer ON/OFF Button - Press this button to activate timed fogging as dictated by the Interval and
Duration settings defined in the System Menu or the two control knobs included on this remote. Press
button again to deactivate timer fogging.
2. Continuous Button - Press this button to activate continuous fogging. Press this button again to
deactivate continuous fogging.
3. Manual Button - Press and hold this button down for full fog output. Fogging stops when this
button is released.
4. Duration Control Knob - This knob will adjust the duration time of fog output.
5. Interval Control Knob - This knob will adjust the interval time between fog output.
REMOTE CONTROL OPERATION:
1. Plug the included remote control into 1/4" jack input located on the rear of the device.
2. Plug the main power cord into a matching power source and move the power switch to the "On"
position.
3. Allow the machine to warm up fully.
4. After the unit has warmed up, the remote's green indicator LED will glow. This LED indicates that the
unit is ready to emit a low lying fog.
5. Use the control buttons and knobs on the remote to emit fog as desired.
ADJ Products, LLC - www.adj.com - Entour Chill User Manual Page 12

Wired Timer Remote Control