General Setup; Control Panel - ADJ ENTOUR SNOW User Instructions

Entour Snow
1. Open the shipping carton and carefully remove the unit from the
shipping carton.
2. Be sure to remove all the packing material especially around the
snow outlet.
3. Set the machine on a flat dry surface and fill the fluid reservoir with
American DJ brand snow fluid. Place the feeder tube with the filter
deep inside the reservoir and tighten the cap.
4. Plug the unit into a matching power supply.
5. Follow the operating instructions on the next pages for proper
operation.
ADJ Products, LLC - www.adj.com - Entour Snow Instruction Manual Page 8
General Set-Up Entour Snow
MENU BUTTON - Press this button to cycle between manual mode, DMX
channel mode, and DMX addressing. Use the UP and DOWN buttons to
adjust the DMX address and change the DMX channel mode.
UP BUTTON - Use this button to switch between DMX channel modes and
adjust the DMX address. This button is also used to adjust the fan output
snow output, interval time, and duration time.
DOWN BUTTON - Use this button to switch between DMX channel modes
and adjust the DMX address. This button is also used to adjust the fan out-
put snow output, interval time, and duration time.
MANUAL BUTTON - Press this button to manually control snow output.
TIMER ON/OFF BUTTON - Press this button to activate the timer function.
ADJ Products, LLC - www.adj.com - Entour Snow Instruction Manual Page 9

Control Panel