Table of Contents
Advertisement
Always be sure to maintain an adequate supply of ADJ Brand Fog Juice in the fluid reservoir.
Running the fog machine dry will cause pump failure and or clogging. This is the largest cause
of failure in fog and haze machines. We recommend use of ADJ brand fog juice only!
VFTR Timer Remote: Connect the remote to the fog machine. The timer function allows fog to be
emitted at designated intervals. The remote has three (3) L.E.D.s that indicate different functions.
Please note that the timer function is inactive when DMX mode is activated.
•
The YELLOW LED on the left indicates that the timer is turned on and is activated.
•
The RED LED indicates continuous fogging is active.
•
The GREEN LED on the right is for manual fogging. Wait for the GREEN LED to light up, then
press the button for manual fogging.
The remote also features three rotary knobs:
•
The Duration knob sets the timer duration (Length of fog output).
•
The Interval knob sets the fog output intervals (Length between fog output bursts).
•
The Output knob sets the amount of fog the machine will output.
Caution: Before removing or replacing the remote control unit, disconnect the power supply.
Wireless Remote Control: This device can also be operated by wireless remote. Plug the receiver
box into the wireless input, and locate the four numbered dip switches on the side of the receiver.
Select any dip switch and flip it to the ON position. The numbered button on the remote that corre-
sponds to the selected dip switch will now control fog output. For example, if dip switch #3 is set to
the ON position, then button 3 on the wireless remote will control fog output.
TIMER REMOTE OPERATION
10
Advertisement
Table of Contents
