Table of Contents
Advertisement
Always be sure to maintain an adequate supply of ADJ Brand Fog Juice in the fluid reservoir.
Running the fog machine dry will cause pump failure and or clogging. This is the largest cause
of failure in fog and haze machines. We recommend use of ADJ brand fog juice only!
Wireless Remote Operation: Plug the unit into power, and allow about six (6) minutes for it to reach
operating temperature. A green LED located at the rear of the unit will illuminate when the unit has
reached operating temperature, indicating the unit is ready to emit fog. If the green LED is illuminated
and fog does not come out after holding the button down for 30 seconds, check the fluid tank and
verify whether fluid level is low.
The function of each button is as defined below:
•
Button 1 - Fog + Red LEDs
•
Button 2 - Fog + Green LEDs
•
Button 3 - Fog + Blue LEDs
•
Button 4 - Fog + Red, Green, & Blue LEDs
•
Button 5 - Fog + Red & Green LEDs
•
Button 6 - Fog + Red & Blue LEDs
•
Button 7 - Fog + Green & Blue LEDs
•
Button 8 - Fog + Red, Green, & Blue LEDs + Strobing
WIRELESS REMOTE OPERATION
8
Advertisement
Table of Contents
