Installation; Before Installation; Assembly Parts - Miele PUR 98 D Operating And Installation Instructions

Before installation


Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.

Assembly parts

4 screws, 7 x 110 mm and
4 plugs, 10 x 80 mm
for securing the rangehood to the
ceiling
The screws and plugs are for use in
concrete ceilings only.
The plugs must only be used
together with 7 x 110 mm screws.
For other types of ceiling
construction, alternative fixings will
be required. Make sure the ceiling is
able to take the weight of the
rangehood.
4 extension piece holders
for aligning and securing the telescopic
extension piece
4 screws M4 x 8.5 mm
for securing the extension piece
holders
14 screws M4 x 8 mm
for securing the spacer frame and
securing the rangehood to the
installation frame
1 screw M4 x 16 mm
for securing the tower
Conversion kit for recirculation
mode (DUI 32)
(not supplied, available as an optional
accessory) The kit includes a
directional unit, aluminium hose and
hose clips.
Keep the following in a safe place:
1 lever
for replacing lamps.

Installation

25