Table of Contents
Advertisement
Before installation
Before installing the appliance,
read all of the information contained
in this chapter and also in the
"IMPORTANT SAFETY
INSTRUCTIONS" section.
Installation parts
4 screws, 7 x 110 mm and
4 plugs, 10 x 80 mm
for securing the ventilation hood to the
ceiling (not for use in USA / CDN).
The screws and plugs are designed
for use in solid ceilings only.
Use different fasteners for other
ceiling construction types. Make sure
that the ceiling can support the load.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be mounted.
4 extension piece holders
for aligning and securing the telescopic
chimney
4 screws, M4 x 8.5 mm
for securing the extension piece
holders.
14 screws, M4 x 8 mm
for securing the spacer frame and
securing the hood to the installation
frame.
1 screw, M4 x 16 mm
for securing the chimney.
DUI 32 recirculation kit for
recirculation mode
(not supplied, available as an optional
accessory). The kit includes a
directional unit, aluminum hose, and
hose clips.
Installation
29
Advertisement
Table of Contents
