Cleaning And Care; Housing; Important For Appliances With Lacquered Casing - Miele PUR 98 D Operating And Installation Instructions

Cleaning and care


Before carrying out any
maintenance or cleaning, the
rangehood must be disconnected
from the electricity supply (see
"Warning and Safety instructions").

Housing

General information
Unsuitable cleaning agents can
damage the surfaces and control
elements.
Do not use any cleaning agents
containing soda, acid, chloride, or
solvent.
Do not use any abrasive cleaning
agents, e.g. powder cleaners or
cream cleaners and abrasive
sponges, or pot scourers or sponges
which have been used previously
with abrasive cleaning agents.

Moisture in the rangehood can
cause damage.
Make sure that water does not get
into the rangehood.
 Clean all surfaces and control
elements using a small amount of
warm water and dishwashing liquid.
Apply with a soft sponge.
 After cleaning, wipe the surfaces dry
using a soft cloth.
20
Important information for appliances
with stainless steel surfaces
This information does not apply to the
control elements.
Stainless steel surfaces can be cleaned
with a non-abrasive cleaning agent
designed specifically for use on
stainless steel.
To prevent the surfaces from quickly
becoming dirty again, we recommend
treating them with a stainless steel care
product (available from Miele).
Important for appliances with
lacquered casing
(special order finish)
Minor scratches on the surface are
inevitable when cleaning the casing;
they may be visible depending on the
lighting in the kitchen.