Table of Contents
Advertisement
Cleaning and care
Before proceeding with any
maintenance or cleaning task, the
cooker hood must be disconnected
from the power supply (see "Warning
and Safety instructions").
Housing
General information
Unsuitable cleaning agents can dam-
age the surfaces and control ele-
ments.
Do not use any cleaning agents con-
taining soda, acid, chloride or
solvent.
Do not use any abrasive cleaning
agents, e.g. powder cleaners or
cream cleaners and abrasive
sponges, as well as pot scourers or
sponges which have been used pre-
viously with abrasive cleaning
agents.
Moisture in the cooker hood can
cause damage.
Make sure that water does not get
into the cooker hood.
All external surfaces and control ele-
ments can be cleaned using hot wa-
ter with a small amount of washing-
up liquid applied with a well wrung-
out soft sponge or cloth.
After cleaning, wipe the surfaces dry
using a soft cloth.
18
Important information for appliances
with stainless steel surfaces
This information does not apply to the
control buttons.
Stainless steel surfaces can be cleaned
with a non-abrasive cleaning agent de-
signed specifically for use on stainless
steel.
To prevent the surfaces from quickly
becoming dirty again, we recommend
treating them with a stainless steel care
product (available from Miele).
Important information for appliances
with lacquered casing
(Customisation on request)
Minor scratches on the surface are in-
evitable when cleaning the casing;
they may be visible depending on the
lighting in the kitchen.
Advertisement
Table of Contents
