Maintenance - Toto EcoPower TEL3GSC Instruction Manual

Maintenance

Follow these instructions for daily maintenance.
Use soft cloth for maintenance
For general cleaning
Use a damp, soft cloth to clean the spout and the sensor.
For cleaning dirt
Use a soft cloth with diluted dish washing detergent.
Wipe the area using a wet cloth and dry using a soft cloth.
Caution
Do not scratch the sensor when cleaning.
Avoid using anything that may scratch the spout surface.
Never use polishing powder, detergent that includes coarse particles,
thinner, benzine, acid or alkaline detergent, or a nylon scrub brush.
They will damage the surface of the spout.
Low Battery Indicator (Battery operated models)
1 Indication
ST
Flow time reduced to 2
seconds. (Normally 10
or 60 seconds)
1
2 Indication
ND
If continued to use after
1 indication
ST
Water ow will stop and
sensor light will blink every
4 seconds.
Sensor light
Sensor
Sensor part
Outlet
Battery Speci cations
Use only AA alkaline batteries (2pcs) .
2 years battery life expectancy ,
based on 4,000 cycles per month.
Replace batteries every 2 years as
preventative maintenance.
6