How To Adjust - Toto EcoPower TEL3GSC Instruction Manual

How to Adjust

Bits of Knowledge About EcoPower Model
Mechanism for Hydropowered generator
The ow of water causes the turbine in the power generator to rotate, which generates electric power, and enables the
Automatic Faucet to operate.
Electric power
2
is stored.
The Automatic Faucet
3
is using the charged
power.
Using the faucet 11 times a day for 5 seconds or more will fully recharge the faucet.
How to adjust the temperature
Turn the temperature control handle.
The water temperature has been factory set to 100° F (38° C).
Depending on the conditions of both the cold and hot water
supply, adjust the temperature by turning the temperature control
handle as necessary.
Adjustment of the ow rate
With the built-in regulator valve - 1.06gpm (4L/min.), there is no need to adjust the ow rate.
Use the Automatic Faucet with the stop valve fully opened.
If you need to regulate the ow rate, adjust it by turning the stop valve.
However, the EcoPower model must be used with the stop valve fully opened.
If you need to regulate the ow rate, make sure the ow rate is more than
0.8gpm (3L/min.).
5
Spout
A turbine rotates to
1
generate power.
Controller
Water supply
Power generator
Solenoid valve
Controller unit
※Thermostatically controlled mixing valve
Cover
Coil
Turbine
Temperature control handle
Hot
Cold
Close
Open
Stop valve
2