Download Table of Contents Print this page

Cleaning And Maintenance - Whirlpool ACE 010 Installation, Quick Start

Hide thumbs Also See for ACE 010:

Advertisement

Table of Contents
1. B
EFORE PERFORMING ANY CLEANING
leave the appliance to cool down and unplug
from the mains socket.
2. D
O NOT USE SOLVENTS OR ABRASIVE
products to clean the appliance. A soft, damp
cloth is sufficient.
A
200
, clean the filter holder
BOUT EVERY
COFFEES
for ground coffee as follows:
Remove the filter with frother.
Clean the inside of the filter holder. Never
wash in a dishwasher.
Unscrew the cap of the frother
by turning anticlockwise.
Remove the frother from
the container by pushing it
from the cap end.
Remove the gasket.
R
and clean
INSE ALL COMPONENTS
the metal filter thoroughly in
hot water using a brush.
M
the holes in the metal fil- ter are
AKE SURE
not blocked. If necessary, clean with
a pin.
10

CLEANING AND MAINTENANCE

3. E
operations,
frequently.
4. C
IMPORTANT: Never immerse the appliance in
cleaning
water. It is an electrical appliance.
CLEANING THE FILTER HOLDER
the drip tray and drip mesh
MPTY AND WASH
regularly.
LEAN THE WATER TANK
Replace the filter and gasket on
the plastic disk. Make sure to in-
sert the pin on the plastic disk into
the hole in the gasket indicated by
the arrow.
Replace the assembly in the steel
filter container, making sure the
pin is inserted in the hole in the
support.
Finally, screw on the cap by
turning clockwise. Failure to
clean as described above in-
validates the guarantee.

Advertisement

Table of Contents
loading

Table of Contents