T h e following components are supplied with your 1004FDT.
Screws
Back Cover .......................... -7
.................................
........................
Wall Clip
2
Flue Manifold
3
Terminal tube ........................ 3
Insulation Clip
........................
1
Plastic tie for air inlet
connection .............................. 1
wall clips
2
@
Flue Adapter ........................
Keys ....................................... 2
I
p
............
Flue Locking Clamp
2
L ............
1
............
a (
s
1
Air Inlet Hose
........................
1
Insulation Clip
........................
1
CJ
(OPTIONAL FLOOR AND WALL BRACKETS ARE AVAILABLE FOR COMMERCIAL INSTALLATIONS)
Check unit supplied is correct for the gas type in your area.
Refer to local gas authority for confirmation of gas type if in doubt.
Refer to data plate located inside front panel.
Check for damage. if the unit is damaged contact your supplier or Rinnai.
Do not install a damaged unit before checking with your supplier.
Back Cover Set ..................... 1
I s i
Flue Lock Stopper ............... 1
a23
...........................
Instructions
1