Rinnai Energysaver RHFE-1004FDT How To Use Manual page 10

Displaying, setting and adjusting the room
temperature can only be done when the heater is
operating.
When the unit is first-operated, the room
temperature is set at
22C.
Set the desired room temperature with the
up and down buttons while looking at the
display section.
The "Set Temp" can be set to
"C'
or between
"16"
-
" 2 6
, or
"H" (continuous combustion
on High).
The "Room Temp" will display "L" (when
lower than I T ) , "1"
-
" 3 0 (at intervals of
1"C), or " H (when higher than 30%).
Once a temperature is set, it will be stored in
the microcomputer's memory.
Note :
Rooms may not arrive at the set temperature
due to the construction of the room, the
location of the unit, or external temperatures.
"t
Temp
0
" q
Room Temp
0
) ,
1 ,
Press to lower Press to raise
the temperature the temperature
If the heater does not ignite then the pre-set temperature may not be set to a setting which is
higher than the actual room temperature.