Rinnai Energysaver RHFE-1004FDT How To Use Manual page 16

Do not install the unit in an unusually dusty
area.
Use flue guard i f the terminal is easily
accessible to children.
Check local regulations.
Flue guards are available as an optional
extra.
GUARD
Floor must be level.
Do not use electrical extension cords to
connect unit to power supply.
Keep the power cord away from the flue
Flue manifold position.
Centre of hole for flue manifold can be drilled
anywhere within the shaded area.
(To avoid studs etc.)
FOR W E A T H E R B O A R D W A L L S D R I L L
THROUGH CENTRE OF WEATHERBOARD
FROM OUTSIDE, T H E N D R I L L FROM
INSIDE THROUGH PLASTERBOARD.
I
I
I
When drilling the flue hole, check for water
and gas pipes and electric cables before
starting to drill.
Use an 80mm (8cm) drill for hole through
wall.